sqlserver存储过程分页代码第1/2页

declare @TotalCount int
declare @TotalPageCount int
exec P_viewPage_A 'type1','*','id','','id asc',1,0,4,3,@TotalCount output,@TotalPageCount output

select * from type1


Create PROC P_viewPage_A
/*
nzperfect [no_mIss] 高效通用分页存储过程(双向检索) 2007.5.7 QQ:34813284
敬告：适用于单一主键或存在唯一值列的表或视图
ps:Sql语句为8000字节,调用时请注意传入参数及sql总长度不要超过指定范围
*/
@TableName VARCHAR(200), --表名
@FieldList VARCHAR(2000), --显示列名，如果是全部字段则为*
@PrimaryKey VARCHAR(100), --单一主键或唯一值键
@Where VARCHAR(2000), --查询条件 不含'where'字符，如id>10 and len(userid)>9
@Order VARCHAR(1000), --排序 不含'order by'字符，如id asc,userid desc，必须指定asc或desc
--注意当@SortType=3时生效，记住一定要在最后加上主键，否则会让你比较郁闷
@SortType INT, --排序规则 1:正序asc 2:倒序desc 3:多列排序方法
@RecorderCount INT, --记录总数 0:会返回总记录
@PageSize INT, --每页输出的记录数
@PageIndex INT, --当前页数
@TotalCount INT OUTPUT, --记返回总记录
@TotalPageCount INT OUTPUT --返回总页数
AS
SET NOCOUNT ON
IF ISNULL(@TotalCount,'') = '' SET @TotalCount = 0
SET @Order = RTRIM(LTRIM(@Order))
SET @PrimaryKey = RTRIM(LTRIM(@PrimaryKey))
SET @FieldList = REPLACE(RTRIM(LTRIM(@FieldList)),' ','')
WHILE CHARINDEX(', ',@Order) > 0 OR CHARINDEX(' ,',@Order) > 0
BEGIN
SET @Order = REPLACE(@Order,', ',',')
SET @Order = REPLACE(@Order,' ,',',')
END
IF ISNULL(@TableName,'') = '' OR ISNULL(@FieldList,'') = ''
OR ISNULL(@PrimaryKey,'') = ''
OR @SortType < 1 OR @SortType >3
OR @RecorderCount < 0 OR @PageSize < 0 OR @PageIndex < 0
BEGIN
PRINT('ERR_00')
RETURN
END
IF @SortType = 3
BEGIN
IF (UPPER(RIGHT(@Order,4))!=' ASC' AND UPPER(RIGHT(@Order,5))!=' DESC')
BEGIN PRINT('ERR_02') RETURN END
END
DECLARE @new_where1 VARCHAR(1000)
DECLARE @new_where2 VARCHAR(1000)
DECLARE @new_order1 VARCHAR(1000)
DECLARE @new_order2 VARCHAR(1000)
DECLARE @new_order3 VARCHAR(1000)
DECLARE @Sql VARCHAR(8000)
DECLARE @SqlCount NVARCHAR(4000)
IF ISNULL(@where,'') = ''
BEGIN
SET @new_where1 = ' '
SET @new_where2 = ' WHERE '
END
ELSE
BEGIN
SET @new_where1 = ' WHERE ' + @where
SET @new_where2 = ' WHERE ' + @where + ' AND '
END
IF ISNULL(@order,'') = '' OR @SortType = 1 OR @SortType = 2
BEGIN
IF @SortType = 1
BEGIN
SET @new_order1 = ' ORDER BY ' + @PrimaryKey + ' ASC'
SET @new_order2 = ' ORDER BY ' + @PrimaryKey + ' DESC'
END
IF @SortType = 2
BEGIN
SET @new_order1 = ' ORDER BY ' + @PrimaryKey + ' DESC'
SET @new_order2 = ' ORDER BY ' + @PrimaryKey + ' ASC'
END
END
ELSE
BEGIN
SET @new_order1 = ' ORDER BY ' + @Order
END
IF @SortType = 3 AND CHARINDEX(','+@PrimaryKey+' ',','+@Order)>0
BEGIN
SET @new_order1 = ' ORDER BY ' + @Order
SET @new_order2 = @Order + ','
SET @new_order2 = REPLACE(REPLACE(@new_order2,'ASC,','{ASC},'),'DESC,','{DESC},')
SET @new_order2 = REPLACE(REPLACE(@new_order2,'{ASC},','DESC,'),'{DESC},','ASC,')
SET @new_order2 = ' ORDER BY ' + SUBSTRING(@new_order2,1,LEN(@new_order2)-1)
IF @FieldList <> '*'
BEGIN
SET @new_order3 = REPLACE(REPLACE(@Order + ',','ASC,',','),'DESC,',',')
SET @FieldList = ',' + @FieldList
WHILE CHARINDEX(',',@new_order3)>0
BEGIN
IF CHARINDEX(SUBSTRING(','+@new_order3,1,CHARINDEX(',',@new_order3)),','+@FieldList+',')>0
BEGIN
SET @FieldList =
@FieldList + ',' + SUBSTRING(@new_order3,1,CHARINDEX(',',@new_order3))
END
SET @new_order3 =
SUBSTRING(@new_order3,CHARINDEX(',',@new_order3)+1,LEN(@new_order3))
END
SET @FieldList = SUBSTRING(@FieldList,2,LEN(@FieldList))
END
END
SET @SqlCount = 'SELECT @TotalCount=COUNT(*),@TotalPageCount=CEILING((COUNT(*)+0.0)/'
+ CAST(@PageSize AS VARCHAR)+') FROM ' + @TableName + @new_where1
IF @RecorderCount = 0
BEGIN
EXEC SP_EXECUTESQL @SqlCount,N'@TotalCount INT OUTPUT,@TotalPageCount INT OUTPUT',
@TotalCount OUTPUT,@TotalPageCount OUTPUT
END
ELSE
BEGIN
SELECT @TotalCount = @RecorderCount
END
IF @PageIndex > CEILING((@TotalCount+0.0)/@PageSize)
BEGIN
SET @PageIndex = CEILING((@TotalCount+0.0)/@PageSize)
END
IF @PageIndex = 1 OR @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize)
BEGIN
IF @PageIndex = 1 --返回第一页数据
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where1 + @new_order1
END
IF @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize) --返回最后一页数据
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(ABS(@PageSize*@PageIndex-@TotalCount-@PageSize))
+ ' ' + @FieldList + ' FROM '
+ @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1
END
END
ELSE
BEGIN
IF @SortType = 1 --仅主键正序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' > '
+ '(SELECT MAX(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order1 +' ) AS TMP) '+ @new_order1
END
ELSE --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(@PageSize) + ' '
+ @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' < '
+ '(SELECT MIN(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
+ ' ) AS TMP ' + @new_order1
END
END
IF @SortType = 2 --仅主键反序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' < '
+ '(SELECT MIN(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
+' FROM '+ @TableName
+ @new_where1 + @new_order1 + ') AS TMP) '+ @new_order1
END
ELSE --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(@PageSize) + ' '
+ @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' > '
+ '(SELECT MAX(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
+ ' ) AS TMP ' + @new_order1
END
END
IF @SortType = 3 --多列排序，必须包含主键，且放置最后，否则不处理
BEGIN
IF CHARINDEX(',' + @PrimaryKey + ' ',',' + @Order) = 0
BEGIN PRINT('ERR_02') RETURN END
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ ' SELECT TOP ' + STR(@PageSize*@PageIndex) + ' ' + @FieldList
+ ' FROM ' + @TableName + @new_where1 + @new_order1 + ' ) AS TMP '
+ @new_order2 + ' ) AS TMP ' + @new_order1
END
ELSE --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ ' SELECT TOP ' + STR(@TotalCount-@PageSize *@PageIndex+@PageSize) + ' ' + @FieldList
+ ' FROM ' + @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1 + ' ) AS TMP ' + @new_order1
END
END
END
EXEC(@Sql)
GO

private void fyDB()
{
DataTable dt = new DataTable();
string con = System.Configuration.ConfigurationSettings.AppSettings["connectionstring"];
SqlConnection conn = new SqlConnection(con);
SqlCommand comm = new SqlCommand("P_viewPage_A", conn); //建立SqlCommand对象
comm.CommandType = CommandType.StoredProcedure; //设置SqlCommand对象执行类型为存储过程
comm.Parameters.Add("@TableName", SqlDbType.VarChar ,200); //向Parameters参数列表添加参数
comm.Parameters.Add("@FieldList", SqlDbType.VarChar, 2000);
comm.Parameters.Add("@PrimaryKey", SqlDbType.VarChar, 100);
comm.Parameters.Add("@where", SqlDbType.VarChar, 2000);
comm.Parameters.Add("@Order", SqlDbType.VarChar, 1000);
comm.Parameters.Add("@SortType", SqlDbType.Int);
comm.Parameters.Add("@RecorderCount", SqlDbType.Int);
comm.Parameters.Add("@PageSize", SqlDbType.Int);
comm.Parameters.Add("@PageIndex", SqlDbType.Int);
comm.Parameters.Add("@TotalCount", SqlDbType.Int);
comm.Parameters.Add("@TotalPageCount", SqlDbType.Int);
comm.Parameters["@TotalCount"].Direction = ParameterDirection.Output; //设置参数的输出类型
comm.Parameters["@TotalPageCount"].Direction = ParameterDirection.Output; //设置参数的输出类型
comm.Parameters["@TableName"].Value = "type1";//表名
comm.Parameters["@FieldList"].Value = "*";//显示列名，如果是全部字段则为*
comm.Parameters["@PrimaryKey"].Value = "id";//单一主键或唯一值键
comm.Parameters["@where"].Value = "";//查询条件 不含'where'字符，如id>10 and len(userid)>9
comm.Parameters["@Order"].Value = "id asc";//排序 不含'order by'字符，如id asc,userid desc，必须指定asc或desc
comm.Parameters["@SortType"].Value = 1;//排序规则 1:正序asc 2:倒序desc 3:多列排序方法
comm.Parameters["@RecorderCount"].Value = 0;//记录总数 0:会返回总记录
comm.Parameters["@PageSize"].Value = 2;//每页输出的记录数
int id1;
if (Request.QueryString["id"] == null)
id1 = 1;
else
id1 = Convert.ToInt32(Request.QueryString["id"]);
comm.Parameters["@PageIndex"].Value = id1;//当前页数
conn.Open();
// SqlDataReader asr = comm.ExecuteReader();
//int dtr = (int)comm.ExecuteScalar();
SqlDataReader sdr = comm.ExecuteReader();
int i=0;
//while (sdr.Read())
//{
// dt.Rows[i][0] = sdr.GetValue(0);
// dt.Rows[i][1] = sdr.GetValue(1);
//}
dt = ConvertDataReaderToDataTable(sdr);
GridView1.DataSource = dt;
GridView1.DataBind();
// dt.Rows[0][0];
sdr.Close();
// Response.Write(dtr);
Response.Write(comm.Parameters["@TotalCount"].Value + "<br>");
Response.Write(comm.Parameters["@TotalPageCount"].Value + "<br>");
// if((Int32)comm.Parameters["RETURN_VALUE"].Value==0)
conn.Close();
//string conStr = System.Configuration.ConfigurationSettings.AppSettings["connectionstring"];
//SqlConnection connection = new SqlConnection(conStr);
//DataSet dataSet = new DataSet();
//connection.Open();
//SqlDataAdapter sqlDA = new SqlDataAdapter();
//sqlDA.SelectCommand = BuildQueryCommand(connection, "P_viewPage_A", parameters);
//sqlDA.Fill(dataSet, tableName);
//connection.Close();
//return dataSet;
}
#region 将DataReader 转为 DataTable
/// <summary>
/// 将DataReader 转为 DataTable
/// </summary>
/// <param name="DataReader">DataReader</param>
public static DataTable ConvertDataReaderToDataTable(SqlDataReader reader)
{
try
{
DataTable objDataTable = new DataTable();
int intFieldCount = reader.FieldCount;
for (int intCounter = 0; intCounter < intFieldCount; ++intCounter)
{
objDataTable.Columns.Add(reader.GetName(intCounter), reader.GetFieldType(intCounter));
}
objDataTable.BeginLoadData();
object[] objValues = new object[intFieldCount];
while (reader.Read())
{
reader.GetValues(objValues);
objDataTable.LoadDataRow(objValues, true);
}
reader.Close();
objDataTable.EndLoadData();
return objDataTable;
}
catch (Exception ex)
{
throw new Exception("转换DataReader为DataTable出错!", ex);
}
}
#endregion